Used Booth & Relocation Inspection
Know what you're getting before you buy, move or take over a paint booth.
A Spray Booth Services technician inspects the booth end to end and tells you what's working, what needs maintenance or repair, and what to plan for. Pricing depends on the booth and the job, so call for a quote.
Who it's for
Three moments when a booth inspection pays off.
Buying a used booth
Find out what condition the booth is really in before you pay for it, ship it and install it. Read what to inspect first.
Moving a booth
Know what's worn before the move, so you can plan repairs into the project instead of discovering them after. Read what's involved in a move.
Taking over a shop
Inherited a booth with a new building or business? Get a clear picture of where it stands and what it needs.
What the technician checks
An end-to-end look at the booth by a booth specialist.
A booth can look fine on a walk-through and still have worn belts, loaded or bypassed filters, a slow burner or controls that don't work as they should. Those problems show up later as rework, gas bills and downtime.
Our technician inspects the systems that matter most and walks you through what needs attention, in priority order. It's the same end-to-end inspection as our Booth Health Check, timed for a purchase, a move or a takeover.
What we check
Airflow & pressure balance
Intake and exhaust airflow and cabin pressure, so overspray clears and dirt stays out.
Filters & plenum
Intake, ceiling and exhaust filters, plus the plenum, checked for loading, fit and bypass.
Burner, heat & cure cycle
Burner operation, temperature and the bake cycle, checked by the technician.
Fans, motors & belts
Belts, sheaves, bearings and fan wheels inspected for wear that quietly drops airflow.
Controls & safety interlocks
Panel, sensors, pressure switches and interlocks checked for reliable, safe operation.
Doors, seals & lighting
Door seals, latches, light fixtures and lenses checked for leaks, dirt entry and dim light.
All makes and models
- Garmat
- GFS
- Accudraft
- Blowtherm
- Nova Verta
- USI Italia
- Col-Met
- Eagle
- Binks
- DeVilbiss
- Spraybake
What you get
- A clear rundown in priority order: what's in good shape, what needs maintenance or repair now, and what can wait.
- Something to plan and budget with: know what to fix before you buy, during the move, or in your first months running the shop.
- A technician's opinion, not a sales pitch: you decide what to do next. If you want, we schedule the work.
Want to know what to look for yourself first? Read buying a used paint booth, repair or replace an old booth and what a booth condition report tells you.
How it works
From first call to a clear answer.
Tell us about the booth
Call (888) 912-6684 or use the request form. Let us know the make, where it is and what you're planning.
We respond within one business day
We reply with a quote and a time for a technician to come out.
On-site inspection
A technician inspects the booth end to end.
You get the rundown
We walk you through what we found, in priority order, so you can decide what to do next.
Questions & answers
Frequently asked questions
When should I book the inspection?
Before you commit: before you pay for a used booth, before a booth is taken down for a move, or as soon as you take over a shop.
How much does an inspection cost?
Every booth and job is different, so call (888) 912-6684 or send a request and we'll give you a quote.
Is this different from a Booth Health Check?
It's the same end-to-end inspection as our Booth Health Check, focused on the questions you have when buying, moving or taking over a booth.
Do you inspect all makes and models?
Yes. We work on all major booth brands, including Garmat, GFS, Accudraft, Blowtherm, Nova Verta, USI Italia, Col-Met, Eagle, Binks, DeVilbiss and Spraybake.
Can you do the work you find?
Yes. After the inspection you decide what to fix now, what to plan for and what can wait. If you want, we schedule the work.
Where do you work?
On-site across the Denver, Dallas–Fort Worth and Tampa Bay metro areas. Not sure if you're in range? Call and ask.
How quickly will you get back to me?
We respond to every request within one business day.
Guides
Read before you buy or move a booth.
Where we work
On-site service in Denver, Dallas–Fort Worth & Tampa.
We provide hands-on booth and compressor service in these regions. Not sure if you're in range? Call and ask.
Service currently limited to the Denver, Dallas–Fort Worth, and Tampa metro areas.
Call for a quote
Book a used booth or relocation inspection.
Tell us about the booth and what you're planning. We'll get back to you within one business day with a quote and a time for a technician to come out.
We reply within 1 business day.