Industrial & Manufacturing
Industrial Paint Booth Service and Repair
On a production line, a booth that's down is a line that's down. We repair and maintain industrial finishing booths, air make-up units, burners, filtration, and controls in Denver, Dallas–Fort Worth, and Tampa Bay.
What we do
Booth service that protects production uptime.
Industrial finishing runs on throughput, and unplanned booth downtime is expensive in ways a body shop rarely sees: idle crews, late orders, and parts piling up upstream. Spray Booth Services is a division of John Baker Sales, in business since 2003, and paint booths and the compressors that feed them are all we work on.
We service batch and conveyorized booths, large multi-operator cabins, and the air make-up units that feed them, on a schedule that keeps small issues from turning into line stoppages. For an older system you've inherited, start with a Booth Health Check.
What we handle
Planned uptime
Preventive service scheduled around your shifts, so wear is caught before it stops the line.
Air make-up units
AMU heat, airflow, belts, and controls kept in working order. See air make-up unit problems.
Large-system airflow
Balance across big cabins and multi-operator booths, measured rather than guessed.
Filtration
Correct intake and exhaust media, seated properly and changed on pressure readings instead of the calendar.
Burners & heat
Cure and bake systems diagnosed and repaired, from ignition faults to temperatures that won't hold.
Documented service
A record of each visit for your maintenance files. See what records to keep.
Systems we service
- Batch booths
- Conveyorized booths
- Open-face booths
- Downdraft booths
- Air make-up units
- Burners & heat
- Exhaust fans
- Controls & interlocks
Currently serving Denver, Dallas–Fort Worth, and Tampa Bay.
Built for plants and production lines
Running several booths or a finishing line? Here's how we work with plant and maintenance teams.
One point of contact
One service team for every booth at your site, from the first call to the follow-up report.
Scheduled around production
Tell us your shifts and planned shutdowns and we'll plan the visit around them.
Every booth, one plan
A maintenance plan can cover every booth on site, so nothing is missed between visits.
Documented visits
A written summary of what we found and fixed after each visit, for your maintenance records.
Filter history on demand
Smart Filter Monitoring keeps a reading history in the portal you can pull up any time.
We reply within 1 business day.
When an industrial booth needs service
Production booths rarely fail without warning. Call us if you see:
- Manometer readings climbing faster, or filters loading sooner than they used to.
- Overspray drifting out of the booth openings or hanging in the work zone.
- Cure or bake temperatures that drift, or parts coming off the line under-cured.
- Fans that are louder, vibrate, or trip on start.
- Control faults or interlock trips that keep coming back after a reset.
- Doors, seals, or access panels that no longer close tight.
Our guide to industrial finishing booth service for production lines goes deeper on planning service around production.
Planning service around production
Most plants can't take a booth offline on short notice. We schedule maintenance and non-urgent repairs around your shifts and planned shutdowns, and keep wear items like belts, bearings, filters, and seals on a calendar so they're replaced between runs instead of during one.
When something fails mid-run, call and tell us the line is down so we can plan the visit around it. Smart Filter Monitoring can also email you when filter airflow says the filters need attention, before it shows up in the finish.
Questions & answers
Industrial booth service questions
How do you protect our production uptime?
Preventive maintenance catches wear before it stops the line, and we schedule visits around your production. If a booth is down, tell us when you call so we can plan around it.
Do you service air make-up units and large systems?
Yes. AMUs, batch and conveyorized booths, and multi-operator systems are part of our work. See air make-up unit problems.
How quickly do you respond?
We respond to every request within one business day. If the booth is down, tell us when you call so we can plan the visit around it.
How often should an industrial booth be serviced?
It depends on shifts, coatings, and how dirty the plant air is. Multi-shift plants usually need filter attention and inspections more often than a single-shift shop. We'll suggest a schedule after seeing the booth.
Which brands do you service?
All major brands, including GFS, Binks, and DeVilbiss, plus most other makes.
Where do you provide service?
On-site across the Denver, Dallas–Fort Worth, and Tampa Bay metro areas. Not sure if you're in range? Call and ask.
Where we work
On-site service in Denver, Dallas–Fort Worth & Tampa.
We provide hands-on booth and compressor service in these regions. Not sure if you're in range? Call and ask.
Service currently limited to the Denver, Dallas–Fort Worth, and Tampa metro areas.
From our resources
Keep learning.
Guides from our team to help you get more out of your booth.
Free download
Free paint booth maintenance checklist
Daily, weekly, monthly and yearly booth checks on one printable sheet.
Ready when you are
Get your booth running at its best.
Tell us what's going on and we'll get you scheduled. We respond to every request within one business day.
We reply within 1 business day.