Woodworking & Cabinetry
Woodworking and Cabinet Finishing Booth Service
Cabinet, millwork, and furniture finishing lives on clean air. We keep open-face, cross-draft, and downdraft finishing booths pulling clean in Denver, Dallas–Fort Worth, and Tampa Bay.
- Reply within 1 business day
- All makes & models
- Denver · Dallas–Fort Worth · Tampa
What we do
Booth service for wood finishing shops
In a wood shop, contamination is the enemy. One speck of dust in a topcoat can mean sanding and recoating a whole door, and the sanding area next door is always making more dust. We service open-face, cross-draft, and downdraft finishing booths, keeping airflow and filtration right so lacquer, stain, and topcoat come out clean the first time.
Spray Booth Services is a division of John Baker Sales, in business since 2003, and paint booths and the compressors that feed them are all we work on. We handle all makes and models, from a single open-face booth to a full finishing room.
What we handle
How a service visit works
From first call to a booth that runs right
- Step 1
You call or send the form
Call (888) 912-6684 or use the request form. Tell us the booth type, what you spray, and what's showing up in the finish.
- Step 2
We respond within 1 business day
Every request gets a reply within 1 business day so we can ask the right questions and set a time.
- Step 3
On-site diagnosis
A technician checks airflow, filters, pressure, lighting, and controls at your booth to find the actual cause.
- Step 4
Clear explanation and quote
We walk you through what we found, what it takes to fix, and what can wait. You approve before work starts.
- Step 5
Repair or schedule
We fix it on the visit when we can, or schedule the work around your production runs.
What wears out in a finishing booth
Open-face and cross-draft booths full of racked parts wear in predictable places. A technician looks for:
- Uneven exhaust filter loading, a sign airflow is channeling around racks instead of sweeping across the work.
- Hard, dry overspray film on walls and floors that turns into chips and flakes.
- Dulled light lenses that make finishers lean in instead of seeing the problem.
- Worn door and panel seals from moving large parts in and out.
- Fan bearings, belts, and sheaves running long hours in dusty air.
- A manometer with a plugged or cracked line that reads the same number forever.
More in our woodworking and cabinet finishing booth service guide.
Dust, solvent, and housekeeping
Woodworking finishing combines combustible wood dust with flammable solvent vapor. Keep dust off horizontal surfaces in and around the booth, don't let dry overspray film build up, keep filters within their service life, and keep sanding separated from finishing so you're not pulling dust into a solvent-laden space.
When film and dust build past what your crew can safely reach, a Booth Cleanup handles plenums, fixtures, and walls.
The room around the booth
If the sanding area sits at higher pressure than the finishing area, or a dust collector pulls make-up air from the wrong place, wood dust moves toward the booth. Humidity matters too: high humidity with fast-evaporating finishes can cause blush that gets blamed on the booth. We look at the room as well as the booth, and Smart Filter Monitoring can email you when filter airflow says it's time to change.
Questions and answers
Finishing booth service questions
How often should a cabinet shop change booth filters?
Based on measured pressure drop rather than a date, and usually more often than a manual's default. Intake media tends to load faster in a wood shop because of dust from sanding. See intake filters.
How do you keep dust out of the finish?
Balanced airflow, correct filtration, tight seals, and a booth that holds positive pressure against the shop. That keeps sanding dust and overspray off the part.
Do you service open-face and downdraft finishing booths?
Yes: open-face, cross-draft, and downdraft booths, the styles wood shops actually run.
Why does our booth seem dimmer than it used to?
Almost always dry overspray film on the lenses, sometimes with aging lamps behind it. Cleaning lenses is part of a normal service visit, and an LED upgrade is worth pricing on original fixtures.
Do we need a professional cleanout, or can our crew handle it?
Your crew should handle routine wipe-downs, filter changes, and floor coverings. A professional cleanup covers what they can't safely reach: plenums, fan housings, fixtures, and hardened film.
Which brands do you service?
All makes and models, including Binks and DeVilbiss finishing booths.
Where do you provide service?
On-site across the Denver, Dallas–Fort Worth, and Tampa Bay metro areas. Not sure if you're in range? Call and ask.
Where we work
On-site service in Denver, Dallas–Fort Worth & Tampa
We provide hands-on booth and compressor service in these regions. Not sure if you're in range? Call and ask.
- Denver, CODenver metro and the Front Range
- Dallas–Fort Worth, TXThe greater DFW metroplex
- Tampa, FLTampa Bay and surrounding area
Outside these areas? We can come to you when technician travel is covered.
All service areas →Guides
Guides for woodworking and finishing shops
Ready when you are
Get your booth running at its best
Tell us what's going on and we'll get you scheduled.
Prefer to send a request?
We reply within 1 business day.