Dallas–Fort Worth, Texas
Paint Booth Repair & Maintenance in Dallas–Fort Worth
On-site spray booth repair, maintenance, cleaning, and filter monitoring across the DFW metroplex. Part of John Baker Sales, in business since 2003.
- Reply within 1 business day
- All makes & models
- The greater DFW metroplex
Serving Dallas–Fort Worth
Paint booth specialists for North Texas
Spray Booth Services works on paint booths, prep stations, and the compressors that feed them, and nothing else. In Dallas–Fort Worth that means collision shops running hard after hail storms, industrial lines that can't afford a down booth, and finishing shops chasing a clean coat through long, hot summers.
We service all major brands and handle everything from a single burner repair to scheduled maintenance and full booth cleanups. Spray Booth Services is a division of John Baker Sales, in business since 2003.
Areas we serve
- Dallas
- Fort Worth
- Addison
- Arlington
- Irving
- Garland
- McKinney
What we fix and service in DFW
Built for plants and production lines
Running several booths or a finishing line? Here's how we work with plant and maintenance teams.
How a service visit works
From first call to a booth that runs right
- Step 1
You call or send the form
Call (888) 912-6684 or use the request form. Tell us the booth make, what it's doing, and when it started.
- Step 2
We respond within 1 business day
Every request gets a reply within 1 business day so we can ask the right questions and set a time.
- Step 3
On-site diagnosis
A technician checks airflow, filters, heat, and controls at your booth to find the actual cause.
- Step 4
Clear explanation and quote
We walk you through what we found, what it takes to fix, and what can wait. You approve before work starts.
- Step 5
Repair or schedule
We fix it on the visit when we can, or schedule the repair, parts, or maintenance around your production.
What North Texas conditions do to a paint booth
DFW booths work hard, and the climate adds load on top of production. These are the patterns we watch for:
- Heat. Long, hot summers put booth motors, controls, and compressors under constant heat load. Compressors run hotter and push more moisture downstream, so dryers and drains need regular attention. Panel and air temperature also change how coatings flash and cure.
- Dust. Dry, windy stretches and nearby construction load intake filters faster than the calendar suggests. Clogged intakes starve the booth and pull balance off, so check manometer readings more often.
- Storm and hail season. After a big storm, collision work stacks up and booths run longer cycles for weeks. A check before the rush is cheaper than a breakdown in the middle of it.
For more local detail, read our Dallas paint booth service guide and top tips for spray booth service in Dallas.
DFW service area and brands
Service area: Dallas, Fort Worth, Addison, Arlington, Irving, Garland, McKinney, and the surrounding metroplex. If you're on the edge of the metro, call to confirm before you book.
Brands we service: Garmat, GFS, Accudraft, Blowtherm, Nova Verta, USI Italia, Col-Met, Eagle, Binks, DeVilbiss and Spraybake, plus most other makes. See all brands we service, or the pages for Garmat, Accudraft, GFS, Blowtherm, Nova Verta, and USI booths.
Filters and parts: Order booth filters, bulbs, and seals from our sister store, Spray Booth Shop, or use the filter finder to match your booth.
Where we work
Our Dallas–Fort Worth service area
- Denver, CODenver metro and the Front Range
- Dallas–Fort Worth, TXThe greater DFW metroplex
- Tampa, FLTampa Bay and surrounding area
Outside these areas? We can come to you when technician travel is covered.
All service areas →Industries we serve
Booths we work on across DFW
Different finishes, same need: a booth that holds temperature, airflow, and clean air.
Related services
One specialist for your whole finishing operation
Booth repair, maintenance, monitoring, and the compressed air behind it.
Local guides
Guides for DFW shops
Practical reading from our team for shops in your area.
Questions and answers
Dallas–Fort Worth paint booth service questions
Do you cover the whole DFW metroplex?
We cover Dallas, Fort Worth, Addison, Arlington, Irving, Garland, McKinney, and the surrounding area. If you're on the edge of the metro, call to confirm.
How quickly will you respond?
We reply within 1 business day. If your booth is down, tell us when you call so we can plan the visit around it.
Can you keep our production booth uptime high?
That's the goal. A Booth Uptime Plan catches wear before it stops the booth, and maintenance clients get priority when something does go wrong.
Does Texas heat affect my booth and compressor?
Yes. Heat adds load to motors, controls, and compressors, and hot compressors push more moisture into the air lines. Regular dryer and drain service keeps water out of the finish.
How often should we change filters in a dusty season?
Go by airflow, not the calendar. Watch your manometer readings, or let Smart Filter Monitoring email you when filter airflow says they're due.
Which brands do you service in DFW?
All makes and models, including Garmat, GFS, Accudraft, Blowtherm, Nova Verta, USI Italia, Col-Met, Eagle, Binks, DeVilbiss and Spraybake.
Do you service compressors too?
Yes. See compressor service.
Ready when you are
Get your booth running at its best
Tell us what's going on and we'll get you scheduled.
Prefer to send a request?
We reply within 1 business day.