Booth Cleanups
Professional Paint Booth Cleaning and Restoration
Years of overspray dim your lights, load your filters, and put dirt in the finish. A full paint booth cleaning and recoat brings the booth back to bright, clean, and easy to maintain. On-site in Denver, Dallas–Fort Worth, and Tampa Bay.
What we do
A deep paint booth cleaning, done right.
Built-up overspray on walls, ceilings, and light fixtures works against you every day. Light levels drop, so defects are harder to see. Dried overspray flakes loose and lands in fresh paint. And a dirty booth takes longer to keep clean between jobs.
A booth cleanup strips that buildup and recoats the surfaces so the booth looks and works like new again. It's a common reset for woodworking and collision shops chasing a cleaner finish, and a good time to spot wear that a dirty booth hides.
What's included
Walls & ceilings
Cleaned and recoated so the booth looks and performs like new.
Brighter lighting
Clean fixtures and surfaces mean better light for catching defects.
Cleaner air, cleaner finishes
Less contamination in the booth means fewer flaws in the coat.
Easier to maintain
Start fresh so day-to-day upkeep is faster and simpler.
Less rework
Cleaner conditions mean less denibbing, buffing, and redos.
Documented results
We show you the before-and-after condition of your booth.
Currently serving Denver, Dallas–Fort Worth, and Tampa Bay.
How a cleanup works
From first call to a clean, bright booth.
You call or send the form
Call (888) 912-6684 or use the request form. Tell us the booth size, make, and how long since its last cleaning.
We respond within one business day
Every request gets a reply within one business day so we can ask questions and set a time to look.
We assess the booth
A technician looks at the buildup, the booth's size and layout, and anything else that needs attention.
Clear scope and quote
You get a quote that spells out what's included and a realistic timeline planned around production.
Cleanup and recoat
We clean and recoat the booth, then walk you through the before-and-after condition.
Signs your booth is due for a cleaning
- The booth looks dimmer than it used to, even with working bulbs.
- Overspray is flaking off walls, ceilings, or light lenses.
- Nibs and contamination keep showing up after you've changed filters.
- Daily wipe-downs no longer get the booth clean.
- You have a big job, an inspection, or a busy season coming up.
More in when a booth needs a professional cleanout and why a booth refresh pays off.
Cleaning is a good time to check the rest of the booth
With the booth out of production and the surfaces clean, worn door seals, damaged light lenses, and buildup in the exhaust path are easier to see. Overspray that gets past the filters ends up in ductwork, where it restricts airflow over time. See booth ductwork buildup and leaks. If we find something that needs repair, we'll explain it and quote it separately. Nothing gets added without your approval.
After a cleanup, fresh filters keep the booth clean longer. Order them from Spray Booth Shop or use the filter finder.
Industries we serve
Booths we clean and restore.
Different finishes, same need: a booth that holds temperature, airflow, and clean air.
Automotive & collision
Body shops and dealerships running downdraft and crossdraft booths every day.
Industrial
Manufacturing and finishing lines where a down booth stops production.
Aviation
Aircraft and component finishing where airflow and cleanliness are tightly controlled.
Woodworking
Cabinet, millwork, and furniture shops that need a dust-free coat.
Marine
Boat and marine refinishing with large surfaces and demanding coatings.
Powder coating
Powder booths that depend on steady, balanced airflow to work.
Questions & answers
Frequently asked questions
What's included in a paint booth cleaning?
We clean and recoat walls and ceilings and clean light fixtures for brighter light, bringing the booth back to like-new. Your quote spells out the exact scope, and we document the before-and-after condition so you can see what changed.
How long does a cleanup take?
It depends on booth size and how much buildup there is. We'll assess your booth and give you a realistic timeline so you can plan around production.
How often should a booth be cleaned?
It varies with how hard you run and what you spray. Many shops schedule a full cleanup periodically to keep lighting bright, contamination down, and daily upkeep easy.
Will a cleanup actually improve my finishes?
Yes. Less built-up overspray means cleaner air and brighter light, which means fewer contamination flaws and less denibbing and buffing on every job.
Does the booth have to be out of service?
Yes, the booth can't run while it's being cleaned and recoated. We schedule the work with you so it fits around your production.
How is a cleanup different from maintenance?
A cleanup restores the booth's surfaces and lighting. A Booth Uptime Plan keeps the mechanical side running: airflow, filters, heat, belts, and controls. Most shops benefit from both.
Do you clean booths in my area?
We work on-site across the Denver, Dallas–Fort Worth, and Tampa Bay metro areas. Not sure if you're in range? Call and ask.
Where we work
On-site service in Denver, Dallas–Fort Worth & Tampa.
We provide hands-on booth and compressor service in these regions. Not sure if you're in range? Call and ask.
Service currently limited to the Denver, Dallas–Fort Worth, and Tampa metro areas.
From our resources
Keep learning.
Guides from our team to help you get more out of your booth.
Free download
Free paint booth maintenance checklist
Daily, weekly, monthly and yearly booth checks on one printable sheet.
Ready when you are
Get your booth running at its best.
Tell us what's going on and we'll get you scheduled. We respond to every request within one business day.
We reply within 1 business day.