Blowtherm Service
Blowtherm Paint Booth Service and Repair
Independent service for Blowtherm booths. Burner, controls, airflow, and efficiency kept dialed in on-site in Denver, Dallas–Fort Worth, and Tampa Bay.
- Reply within 1 business day
- All makes & models
- Denver · Dallas–Fort Worth · Tampa
What we do
What we do on Blowtherm booths
Blowtherm is a European-built brand common in collision and refinish shops. Keeping the burner, controls, and airflow dialed in is what protects a booth's performance over time. Like any imported equipment, parts and documentation can take longer to source than for a domestic unit, so planning service before you're down matters more.
Spray Booth Services provides independent service for Blowtherm booths, along with all makes and models. We're a division of John Baker Sales, in business since 2003, and paint booths and the compressors that feed them are all we work on. Whether you need a repair or scheduled maintenance, we'll find the real cause and explain it in plain terms.
Blowtherm systems we service
- Downdraft booths
- AMUs
- Burners
- Control packages
What we handle
How a service visit works
From first call to a booth that runs right
- Step 1
You call or send the form
Call (888) 912-6684 or use the request form. Tell us it's a Blowtherm booth, what it's doing, and when it started. A photo of the data plate helps.
- Step 2
We respond within 1 business day
Every request gets a reply within 1 business day so we can ask the right questions and set a time.
- Step 3
On-site diagnosis
A technician checks airflow, filters, heat, dampers, and controls on your booth as it's actually configured, not from a generic spec sheet.
- Step 4
Clear explanation and quote
We walk you through what we found, what it takes to fix, and what can wait. You approve before work starts.
- Step 5
Repair or schedule
We fix it on the visit when we can, or schedule the repair, parts, or maintenance around your production.
Common Blowtherm booth problems
Booths almost never fail all at once. On a heated booth like this, wear follows predictable paths:
- Heat cycling wears burner parts first: carbon on the ignition electrode and flame rod, drifting gaps, and a booth that lights on the second or third try.
- Repeated expansion loosens fasteners, opens duct seams, and hardens door and access-panel gaskets, stealing temperature from every cure.
- Filter loading raises static pressure, so fans work harder, belts slip, bearings run hotter, and cabin balance drifts.
- Dampers and actuators stop reaching their commanded position.
- Solvent and overspray harden seals and coat light lenses long before a lamp fails.
Our article on Blowtherm booth service goes into each of these in more detail.
What you can check yourself
Some of this is shop-level work you don't need a technician for:
- Read and log the manometer at the same time each day. The trend matters more than any one number.
- Change intake and exhaust filters on readings and a schedule, not on complaint.
- Keep floor grates clear and the cabin swept.
- Wipe light lenses and note any that look yellow or dim.
- Listen for new fan noise and check that belts aren't slipping.
- Inspect door seals for tears, flattening, and gaps.
Logging the manometer is the cheapest early warning you have. See how to read a paint booth manometer.
When to call a technician
Call a technician for anything involving the gas train, burner, flame safety, interlocks, electrical panel, or drive components. For everything else, scheduled maintenance catches wear on your calendar, and paint booth repair covers it when something has already let go.
If you're not sure how much life is left in the booth, a Paint Booth Evaluation gives you a technician's view before you budget. Smart Filter Monitoring can email you when filter airflow says it's time to change.
Blowtherm is a trademark of its owner. Spray Booth Services is an independent service company and is not affiliated with or endorsed by Blowtherm or any booth manufacturer named on this page.
Questions and answers
Blowtherm booth service questions
Why won't my Blowtherm booth reach bake temperature anymore?
Most often some combination of filter loading, a leaking or out-of-position damper, burner or ignition wear, or a drifting temperature probe. It usually takes a technician with gauges on the unit to separate them.
Do I need Blowtherm-specific parts?
Some components are brand-specific and some are standard commercial parts. Which is which depends on your configuration, and it's worth confirming before you're down.
How often should a Blowtherm booth be serviced?
It depends on how many cycles you run and how dirty your environment is. Most production shops do well with a scheduled professional inspection plus their own filter and manometer routine. See how often to service your booth.
Are you a Blowtherm dealer or authorized service center?
No. Spray Booth Services is an independent service company. We are not affiliated with or endorsed by Blowtherm, and we'll tell you if something needs to go back to the manufacturer.
Can you service a booth you didn't install?
Yes. We work on booths regardless of who sold or installed them.
How quickly do you respond?
We reply within 1 business day. If the booth is down, tell us when you call so we can plan the visit around it.
Where do you provide service?
On-site across the Denver, Dallas–Fort Worth, and Tampa Bay metro areas. Not sure if you're in range? Call and ask.
Where we work
On-site service in Denver, Dallas–Fort Worth & Tampa
We provide hands-on booth and compressor service in these regions. Not sure if you're in range? Call and ask.
- Denver, CODenver metro and the Front Range
- Dallas–Fort Worth, TXThe greater DFW metroplex
- Tampa, FLTampa Bay and surrounding area
Outside these areas? We can come to you when technician travel is covered.
All service areas →Guides
Related guides
Ready when you are
Get your Blowtherm booth running at its best
Tell us what's going on and we'll get you scheduled.
Prefer to send a request?
We reply within 1 business day.